Get it delivered a good 12V lighting transformer low voltage lighting on your patio, and all is well. But what is a good 12v transformer? And how do you know that you can not find a way inappropriate? Let me answer that question for you.
The right kind of simple transformer converts line voltage from 12V to 12V - AC or DC. You will know exactly what type it is necessary for the bulbs. You should find a fairly simple task and able to buy the right kind of - andit is not. Especially if you shop at the place where the goods are clearly identified and information is abundant. But what if you save one in the mood for a bit 'trial to make money - or both? One might conclude that there is some 'junk treasure somewhere that the work could not come for no money at all! Would not it be great? And of course - you can indeed have the right kind around, ready to be implemented as a transformer and lighting can bealso significantly correlated with power input terminals and output terminals are marked 12v. Piece of cake, right? But get this: Even if everything appears to control, even if they were raised by 12 volts when you have all the power your need to be united, etc. - can still be bad news.
I'm going to get to the point. If the transformer or autotransformer is a transformer or bipolar, you need to make a point! An auto-transformer is used in many applications, including automotive applications, but I never usedlights for patio or other outdoor lighting - the lighting project or do it yourself ever! Why not? Because unlike normal processors, in an automatic processor, there is a direct electrical connection from the network terminals to the output terminals. This means you could receive an electric shock, even if you should touch the terminals of low voltage! Never, never, ever use for lighting patio - or anything else for that matter.
The other type is best to avoid the transformer pole. Thisis not as dangerous for you - but it may damage your light. A bipolar voltage transformer is both a positive and a negative voltage, which means that there are 3 output terminals or pins, instead of just two - as in a normal transformer. If these ports labeled properly - or not - you might accidentally connect the lights, the pins of positive and negative - instead of the positive and ground, as you should. In this case, you get the tension betweennegative and positive, which is twice the rated voltage - 24V instead of 12V. The lights may be good with this - and could not. It is no coincidence.
0 comments:
Post a Comment